ENC Measurement for ASIC Preamp Board as a Detector Module for PET System

N. Nagara

Abstract


We developed a gamma ray detector with an LuAG:Pr scintillator and  an avalanche photodiode as a detector for a positron emission tomography (PET) system. Studies have been performed on the influences of gamma irradiation on application-specific integrated circuit (ASIC) preamp boards used as a detector module. As a device used in nuclear environments for substantial durations, the ASIC has to have a lifetime long enough to ensure that there will be a negligible failure rate during this period. These front-end systems must meet the requirements for standard positron emission tomography (PET) systems. Therefore, an equivalent noise charge (ENC) experiment is needed to measure the front-end system's characteristics. This study showed that minimum ENC conditions can be achieved if a shorter shaping time could be applied.

 

Received: 22 October 2014 ; Revised: 23 Februari 2016; Accepted: 3 March 2016


Keywords


Positron emission tomography; Equivalent noise charge; Application-specific integrated circuit; Avalanche photodiodes

Full Text:

PDF


DOI: https://doi.org/10.17146/aij.2016.506



Copyright (c) 2016 Atom Indonesia

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.